Netsys NM-120 Kit TX to FX WDM Media Converter
Buy Online at http://saratota-direct.co.uk/index.php?route=product/product&path=65&product_id=78
Overview
The Netsys NM-102 KIT including NM-102 A20 (Master) & NM-102 B20 (Slave) is a converter that translates transmission signals from a twisted-pair 100BASE-TX cable to 100BASE-FX fiber optic cable(UTP). The converter automatically adapts to the
highest level of performance supported by the device connected to the ETHERNET port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth.
When the device connected is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. In fiber-optic interface, the port of converter operates at 1310 nm and use
WDM connector. Single-mode model that supports distance up to 20-km is available.
Key Features
• Support auto-MDIX and 10/100Base T for RJ-45 port
• Complies with IEEE 802.3 for 10BaseT/802.3u for 100Base-TX and 100Base-FX.
• Supports WDM duple mode for TX/RX on single fiber cable
• Compact in size, easy installation
• Data Transfer Rate: 100Mbps
• Duplex mode support: Full or half-duplex mode by Auto-Negotiation
• LED indicators: PWR, LNK/ACT, SPD, FDX for copper RJ-45 LINK/ACT, FDX for Fiber optic.
• Fiber: Single Mode: 8.3/125, 8.7/125, 9/125µm optic fiber and up to 20km
• EMI certified by CE, FCC
• External Power Adapter:Input:AC 85~240 volts/50~60Hz.Output:DC 5V/1A
Product Specifications
Model:
NM-102A
NM-102B
Protocol and Standards:
IEEE802.3 & IEEE802.3u
Maximum Speed:
Full Duplex: 200Mbps for 100Base-Tx
Half Duplex: 100Mbps for 100Base-Tx
Cabling:
Ethernet: 100Base-TX 2 pair Cate.5 UTP Cable
Fiber: Single Mode 8.3/125, 8.7/125, 9/125µm
Modes:
Full or half-duplex mode, Auto-Negotiation
Packet Forwarding Rate (64Bytes):
14880pps@10Mbps / 148800pps@100Mbps
Connector:
Copper: RJ-45
Fiber: Single SC-type connector
TX Optical Frequency: 1550nm(1480~1580nm)
1310nm(1260~1360nm)
RX Optical Frequency:
Model NM-102B = 1310nm(1260~1360nm)
Model NM-102A = 1550nm(1480~1580nm)
Max. / Min. Optical Launch Power:
–8dBm / -14dBm
Optical Receive Sensitivity:
–31dBm
Specification for Optic Fiber
Single-Mode Fiber:
Diameter: 10/25μm wavelength
1300 (1270~1355) nm
Multi-Mode Fiber:
Diameter: 62.5/125μm wavelength
850 (1270~1355) nm
Diameter: 62.5/125μm wavelength
1300 (1270~1355) nm
General Specification
Operating Temperature:
0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature:
-20°C ~ +65°C (-4°F ~ 149°F)
Humidity:
Up to 90% (non-condensing)
Dimension:
70(W) x 94(L) x 26(H) mm
Note:
Specifications in this datasheet are subject to change without prior notice.