Netsys NV-202P Long Reach Ethernet Extender with PoE
Buy Online at http://saratota-direct.co.uk/index.php?route=product/product&path=59&product_id=59
Overview
NV-202P is a Long Reach Ethernet Extender with PoE equipped with two 10/100Mbp . Ethernet ports with power injector. It delivers data and electrical power to access points using standard Category 5 Ethernet cable that provide an economical solution for commercial-grade applications. Operators in various enterprises will now be able to deploy PoE devices in any service location, install network security cameras, wireless access point security / VOIP, or access control systems in any place where you have basic wire connectivity. The NV-202P also supports both central office (CO) and customer-premises equipment (CPE) modes selectable through DIP Switch.
Compliant with ITU-T G.993.2 VDSL2 standard, the NV-202P supports a maximum bandwidth of up to 100Mbps symmetric in VDSL2 solution. Since VDSL2 has the characteristic of higher bandwidth over shorter distances, the ideal architecture for Telcoms is to use fiber optic lines as the backbone and a VDSL2 line as the last mile into the home or office. With outstanding throughput, the NV-202P can complement a fiber network to offer the best solution for delivering Triple play(Video/Voice/Data) or home entertainment services.
Key Features
• Provides 2 x 10/100 Mbps RJ-45 Ethernet ports with power injector
• Supports RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 100Mbps symmetric over Line ports
• Support long reach mode up to 3 km with 24 gauge phone wire
• DIP switch with CO and CPE mode selectable
• Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
• Supports interleave / INP & noise margin config by DIP Switch
• Supports Surge protection for line port
• Auto-detect of PoE IEEE 802.3af/at (up to 30W) equipment providing protection from incorrect installation
• Supports mid-span PoE mode
• Supports wall mounting and DIN-Rail mount installation (Optional)
• Supports point-to-point applications
Product Specifications
Standard
Compliant IEEE 802.3 standard
Compliant IEEE 802.3u standard
Compliant IEEE 802.3af / IEEE 802.3at standard
Compliant ITU-T G993.2 VDSL2 standard
Physical Interface
2 x RJ-45 10/100Mbps auto-negotiation Ethernet port with power injector
1 x RJ-11/Terminal Block connector for VDSL2 line port
1 x DIP Switch
1 x Power Jack
Power & PoE
Input Voltage: 36 ~ 57 V DC (Typical: 48V) (Commercial-grade desktop Power Adapter)
Output: 30W max for each. (Pin Assignment:4/5(+),7/8(-))
LED indication
1 x Power LED
2 x Link/Active Status for Ethernet port
2 x PoE Indicator LED
1 x Link LED for VDSL2 port
1 x CO Mode indicator LED
1 x CPE Mode indicator LED
VDSL2 Line Code
Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
Packet Transfer Mode (PTM)
Operating Temperature
0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
Storage Temperature
-20°C ~ 70°C (-4°F ~ 158°F)
Humidity
10 to 90% (non-condensing)
EMC
EMI Compliant: FCC Class B
EMS Compliant: CE mark Class B
Dimensions
137 x 100 x 27 mm (5.39" x 3.94" x 1.06")
Note:
Specifications in this datasheet are subject to change without prior notice.